New Pedestrian Signal in Atherton
ATHERTON, August 15, 2016 – The Town of Atherton is excited to announce the installation and activation of the new Almendral HAWK Beacon located at El Camino Real and Almendral Avenue. This relatively new concept in traffic technology will greatly improve safety for pedestrians and bicyclists crossing El Camino Real. Improved safety and accessibility across and along El Camino Real has been and will continue to be, a high priority for the Town.
Construction of this important improvement is the result of successful collaboration and partnership between the Town of Atherton, Menlo Park Fire Protection District, and Caltrans District 4. Although the Town of Atherton was the lead agency for the planning, design, and construction, since El Camino Real is a State Highway, Caltrans District 4 was an important partner in developing and approving the design of this project, expediting the processing of the permits and overseeing and approving its construction. Since this project also improves the safety and access on to El Camino Real for emergency response, Menlo Park Fire was an important financial partner funding half of the cost of the HAWK Beacon.
The Almendral HAWK beacon is the first of 13 additional HAWK Beacons to be installed along the El Camino Real within San Mateo County. Two of the additional 13 HAWK Beacons will also be installed in Atherton – one at the Alejandra Avenue crosswalk and the other at the Isabella Avenue crosswalk.
The HAWK (High intensity Activated crossWalK) Beacon is a pedestrian-activated signal system that has been successfully used in a number of cities throughout the United States and according to a 2010 study by the Federal Highway Administration, the HAWK Beacon reduced total crashes by 29% and reduced pedestrian crashes by 69%.
The beacon operates much like a traditional traffic signal. However, the beacon remains dark and motorists proceed as usual until a pedestrian activates the beacon to cross. Once activated, the light for motorists will sequence from flashing amber to steady amber and then to steady red. Once red, cars will be stopped and pedestrians may proceed across. The lights will then change to flashing red notifying cars to proceed when safe. Pedestrians will be signaled to complete crossing and to not start if they haven’t already.
The lights will then go dark again until activated the next time. See illustration below for more information.